USB Adapter (Reader-Writer) for PCMCIA Memory Cards 

for
Connecting with ATA Flash and SRAM PC Cards

[for PC running Windows]

U111-M

This USB interface PCMCIA memory card adapter, U111-M, supports ATA flash PC cards and SRAM PC cards.  It adds one standard 16-bit PCMCIA card slot to desktop and notebook computers through USB port; allowing computers without PCMCIA connectivity to read and write the 16-bit PCMCIA SRAM and ATA Flash memory cards. This USB to PCMCIA memory card adapter, U111M, accepts Type I (3.3 mm thick) and Type II (5 mm thick) 16-bit PCMCIA memory PC Cards. Users can connect this adapter to USB 1.1 or USB 2.0 port of a laptop (notebook PC) or desktop computer, to operate 16-bit PCMCIA memory PC Cards including ATA Flash and SRAM card. It also read/write CompactFlash (CF) with a Type II PCMCIA PC Card Adapter. Note: This product does not support 32-bit PCMCIA CardBus PC Cards. U111M USB to PCMCIA Memory Adapter works with Microsoft Windows 2000 / XP / Vista / 7 (32-bit version) and Windows 7 64-bit version. No software driver is required.

System Requirements Package Content PCMCIA Card Accepted

Part Number Price (US$) U111-M NA   Availability: discontinued Replaced by OmniDrive (below)   OmniDrive USB2 Professional [read/write SRAM and ATA flash cards] OmniDrive USB2 LF [read/write SRAM, ATA flash, and Linear flash cards]

Package Content

• USB-to-PCMCIA Adapter (U111-M)
• Optional second USB power connection (for low power hosts)
• Installation Guide

PCMCIA Memory Card Accepted

• ATA Flash memory PC card.
• SRAM memory PC card.

System Requirements

• Desktop or notebook computer with an available USB 1.1 or 2.0 port
• Windows 2000, XP, Vista, & 7  (32-bit version)
• Windows 7 64-bit

Features

• Fully RoHS compliant
• Supports Type I and Type II PCMCIA card sizes. 
• Connect 16-bit PCMCIA ATA Flash and SRAM PC cards to USB 1.1 or 2.0 port
• Suitable for desktop or notebook computers that are not equipped with PCMCIA card slot. Easily adds one 16-bit PCMCIA card slot to USB equipped desktop or laptop PC
• Eject lever
• No software driver required
• No external power required
• CE/FCC approved
• 1 year warranty and free technical support

Specifications

• PCMCIA version 2.1 / JEIDA 4.1 compliant
• Universal Serial Bus (USB) 1.1 & 2.0 compliant
• Data transfer rate: Up to 1.5 MB/sec (12Mbps)
• Operation Voltage:
  • 5V at 400mA typ. with fault (over-current) protection for PC Cards
  • 3.3V at 400mA typ. with fault (over-current) protection for PC Cards
• Environment:
  • Operating: 0°C to 75°C
  • Storage: -50°C to 150°C
• Physical Dimensions
  • Dimensions: 140 x 83 x 25mm (approximately)
  • Weight: 140g (excluding USB cable)