|
PCI-Express (PCI-E / PCIe) to
ExpressCard Adapter (Controller Card & Reader-Writer)
for
Desktop Computers
PCIE-101
|
This PCI Express (PCIe) to ExpressCard
adapter (Express card drives) adds an
ExpressCard 34 slot to desktop computer
so users can enjoy the same ExpressCard
functionality that a laptop computer provides.
This ExpressCard reader-writer accepts 34mm form
factor
ExpressCards. It supports both PCI Express
(PCIe) based ExpressCard and USB 2.0 based ExpressCard. Users can install this ExpressCard
drives on a desktop computer to operate 3G/3.5G
AirCard
(wireless modem ExpressCard) for broadband internet connection.
Users can also connect other laptop ExpressCards such as
LAN/network, flash memory card adapter (reader), USB 2.0, IEEE-1394 FireWire,
RS-232 Serial, serial ATA/eSATA, ExpressCard adapter for media
cards, and many others on desktop
computers. This card reader-writer works with Microsoft
Windows 2000/ Server 2003/ XP & XP 64-bit/ Vista & Vista 64-bit/ 7 & 7
64-bit, Linux and other operating systems supporting PCI-E (PCIe) and USB 2.0.
No driver is required for this product.
|
|
Part
Number |
Price
(US$) |
Discontinued |
PCIE-101 |
NA |
|
Do you need to use your laptop
ExpressCard on
your desktop? This PCI Express (PCIe) to ExpressCard adapter is the best and most
economical solution for adding an ExpressCard 34 slot to your desktop
computer. By installing this control card into an available PCI-Express slot on
the motherboard of a desktop computer, it will allow a user to connect an ExpressCard/34 card to the back panel of a desktop computer so the user can enjoy the same ExpressCard
functionality that a laptop PC provides. [If front
access is preferred, please order
PCIE-110.]
This high performance PCI
Express (PCIe) Bus to ExpressCard Card Reader/Writer is equipped with one
ExpressCard
34 card socket that accommodates both ExpressCard 34mm form factor cards. It supports all kinds of PCI-E based and USB
2.0 based ExpressCard cards
such as 3G wireless Modem card, port expansion card (eSATA, IEEE
1394 firewire, USB, etc.), LAN/ethernet card, flash memory card adapter, and
many other I/O cards.
Installation is easy. Plug the included USB cable
into an internal USB port, plug the PCIe-to-ExpressCard control board into a PCI-Express slot on
motherboard, and installation is complete. This product itself requires no
drivers.
This card reader-writer works with Microsoft
Windows 2000/Server 2003/XP & XP 64-bit/ Vista & Vista 64-bit/ 7 & 7 64-bit and other operating systems supporting PCIe and USB 2.0.
System Requirements
- One
PCI Express (PCIe) expansion slot (X1,
X4, X8, or X16) on motherboard. [Please make sure that the
motherboard of your desktop computer is equipped with a PCI Express (PCIe)
expansion slot, not the regular
PCI
expansion
slot!]
- One USB 2.0 port.
[Internal USB port is preferred]
- Windows 2000/ Server
2003/ XP & XP 64-bit/ Vista & Vista 64-bit/ 7 & 7 64-bit.
- Unsupported, but known to work with other operating
systems supporting PCIe and USB 2.0.
Package Content
- PCI Express Interface Card
with an ExpressCard 34 Socket
- USB cable
- User guide
Features
- Easy Installation, Plug and Play;
Enable hot-plug and hot-swap
- No drivers needed for this PCIe-to
ExpressCard Adapter
- One rear access ExpressCard socket support
ExpressCard/34 cards.
-
Push-Push mechanism for easy insertion of Express Card
- Support Windows 2000/Server 2003/XP & XP
64-bit/Vista & Vista 64-bit/ 7 & 7 64-bit
- Supports both PCI Express based ExpressCard
and USB 2.0 based ExpressCard
- Supports PCI Express 2.5Gb/s data rate
- Supports USB 2.0 480 Mb/s data rate
-
Mini USB 2.0 connector to USB Host connection
- No external power required
- 1 year warranty and free technical support
Specifications
Copyright © 1997-2021 Amtron Technology, Inc.
PO Box 884
Monterey Park, CA 91754 USA
Tel: (323) 265-8076 Fax:
(323) 488-9747
https://www.amtron.com
|
|
|
|